scoutdiagnostics.com

You are here: Home >  National Swimming Championships

National Swimming Championships

Swimming pool rubber film lock catch and guide roller shall be closely combined

2022-06-26 02:41National Swimming Championships
Summary: Seek the installation and construction method and experience of swimming pool adhesive film in steel structure swimming poolThe interval between rivet fixing points shall not be greater than 250mm, th
Seek the instaSwimming pool rubber film  lock catch and guide roller shall be closely combinedllation and construction method and experience of swimming pool adhesive film in steel structure swimming pool
The interval between rivet fixing points shall not be greater than 250mm, the lock catch and guide roller shall be closely combined, and the adhesive film shall not fall off after being pressed. The pool wall shall be laid along the horizontal direction first, and then from top to bottom. Then the lower end of the pool wall is mechanically fixed with rivets, and the adhesive film at the bottom of the pool is pressed on the adhesive film of the pool wallHow to install the swimming pool adhesive film? Is it glue
Instead of using glue, the hot-melt welding adhesive film shall be applied according to the following steps: laying the pool wall - laying the pool bottom - laying the pool foot or arc corner - welding the joint between the pool wall and the pool bottom - Inspection - Repair - re inspection
Why does the swimming pool use waterproof decorative plastic film
First, look at the color: the color of the good film is even, bright but not fancy, while the color of the poor film is uneven, which looks like a layer of color has fallen off. Secondly, the touch texture and quality of the domestic adhesive film feel rough and too soft, and the internal reinforcing ribs are easy to be torn offHow thick is the pool adhesive film
According to the service life, the thickness of the adhesive film of Rongke swimming pool in China is generally between 0.6mm and 2.0mm, and the average service life of the adhesive film of swimming pool of about 1.5mm is 10 yearsHow long can the swimming pool waterproof membrane be used
The service life of waterproof coating varies according to different varieties. The national standard requires more than 5 years. According to the material characteristics, the longest service life can be the same as that of the swimming pool. However, non-standard products Swimming pool rubber film  lock catch and guide roller shall be closely combinedwill be invalid in less than one yearHow to waterproof the swimming pool? What materials should be used
Outside the waterproof layer, ceramic tiles need to be used as the decorative surface. Common ceramic tiles will fall off and be damaged after being soaked in the pool water for a long time. Therefore, the body parts are often scratched during swimming, especially when the ceramic tiles and concrete are improperly selected, which will be more seriousHow is the indoor swimming pool waterproof? What materials are used
Outside the waterproof layer, ceramic tiles need to be used as the decorative surface. Common ceramic tiles will fall ofSwimming pool rubber film  lock catch and guide roller shall be closely combinedf and be damaged after being soaked in the pool water for a long time. Therefore, the body parts are often scratched during swimming, especially when the ceramic tiles and concrete are improperly selected, which will be more seriousHow to weld the pool adhesive film
During the construction of the detachable swimming pool, the Swimming pool rubber film  lock catch and guide roller shall be closely combinedswimming pool adhesive film is a better swimming pool construction material, because the use of the swimming pool adhesive film can not only play a good waterproof performance, but also its construction cycle is more convenient than the use of other building materials. However, during the construction of the detachable swimming poolWhat is the best material for swimming pool waterproofing
There are several methods for swimming pool waterproofing: hard waterproofing: the whole swimming pool is poured with waterproof concrete; Coiled material waterproof: use waterproof coiled material and supporting adhesive to fully lay 2~3 layers on the inner wall and bottom of the swimming pool, and then stick bricks on the surface
Swimming pool rubber film lock catch and guide roller shall be closely combined

Post a comment

Comment List